CNC Lathe AL-460 / 560 X 500, 750, 1000, 1500
1. The spindle is mounted with high-precision P4 angular contact ball bearings, providing
outstanding radial and trust loads.
2. The spindle is precision machined from high-quality alloy steel, hardened, precision ground, and dynamically balanced, making it ideal for heavy cutting.
3. Quipped with high-speed spindle, speed up to optional 3000 r.p.m.
Photo shown: AL-460×750
Photo shown “X,Z axes MPG manual pulse generator” is option.
Standard Accessories
1. Controller : FANUC
2. Spindle variable speed change
3. Lubrication system
4. Coolant system
5. XZ-axes C3 ball screw
6. Quick change 4-way tool post
7. Manual Tailstock
8. Steady rest Ø6″
9. Semi-back splash guard
10. Heat exchanger
11. Work lamp
12. Dead center
13. Manual, level pads, tools & toolbox
14. 3-jaw chuck SC-9″
*Standard accessories shall be subject to the quotation.
Optional Accessories
1. Transformer
2. Hydraulic 3-jaw chuck
3. Electronic 4-way turret H4
4. Hydraulic turret V8
5. Follow rest
6. Hydraulic steady rest
7. Full enclosed splash guard
(instead of a semi-back splash guard change)
8. Rear chain-type chip conveyor
9. X, Z axes MPG manual pulse generator
(mounted on the Apron)
Specification 500-750
Unit: mm / inch
| Model | AL-460 / 560 | ||
| 500 | 750 | ||
| Capacity | Swing over Bed | 460 (18.11″) / 560 (22.05″) | |
| Swing over cross slide | 230 (9.06″) / 330 (13″) | ||
| Distance between centers | 500 (19.69″) | 750(29.53) | |
| Width of Bed | 317 (12.48″) | ||
| Length of Bed | 1490(58.66″) | 1740(68.5″) | |
| Headstock | Spindle bore, spindle speed | Manual spindle ( gear type ) : 70 (2.76) ,1800 rpm – variable speed | |
| X-axis travel(cross-slide travel) | |||
| Chuck speed must match with spindle speed 3000 rpm. | |||
| Spindle nose | A2-6 | ||
| Range of spindle speed | 1800 rpm / OP.3000rpm | ||
| Travel | 25 mm, pitch 5 mm | 230(9.06”) / 280 (11.03”) by standard manual 4-way tool post X-axis travel changed by different turret. | |
| Z-axis travel(longitudinal travel) | 500 (19.67″) | 750(29.53) | |
| Z-axis travel changed by different turret, chuck or Tail stock. | |||
| X-axis ball screw diameter | 50 mm, pitch 10 mm | ||
| Z-axis ball screw diameter | 50 mm , pitch 10 mm | ||
| Feed | X-axis rapid feed | 5000 mm/min (196.85″ /min) | |
| Z-axis rapid feed | 7500 mm/min (295.28″ /min) | ||
| X-axis cutting feed rate | 0-3000 mm/min (118.11″ /min) | ||
| Z-axis cutting feed rate | 0-5000 mm/min (196.85″ /min) | ||
| Turret | Tool station, tool shank | Upper Parts: RAL-7035 (light gray) + Base: RAL-5015 (blue) | |
| Tail-stock | Quill diameter | 52 ( 2.05″ ) | |
| Quill travel | 130 ( 5.12″) | ||
| Taper of center | MT.4 | ||
| Motor | Spindle Motor | 7.5kw (10HP) | |
| X-Axis servo Motor | 1.2 kw (1.6HP) | ||
| Z-Axis servo Motor | 1.2 kw (1.6HP) | ||
| Coolant pump | 0.1 kw(1/8 HP) | ||
| Optional : Hydraulic pump Motor | Optional: 1.5 kw (2HP) | ||
| Measurement | N.W./G.W.(approx) -AL-460 (kgs) | 2600/2700 | 2750/2850 |
| N.W./G.W.(approx) -AL-560 (kgs) | 2900/3000 | 3050/3150 | |
| Shipping dimension-Semi-guard (LxWxH) (approx) | L: 2500 , 2750 x W 2000x H2210 ( 98″ , 109″ x 79″ x 87″ ) | ||
| Shipping dimension-Full-guard (LxWxH) (approx) | L: 3300, 3550 x W2000x H2210 ( 130″, 140″ x 79″ x 87″ ) | ||
| Standard Color | Upper Parts: RAL-7035 (light gray) + Base : RAL-5015 (blue) | ||
*Note :
(1) X and Z axes actual cutting travel will change when equipped with different chuck, turret, and tail stock.
(2) Specifications are subject to change without notice for improvement
Specification 1000-1500
| Model | AL-460 / 560 | ||
| 1000 | 1500 | ||
| Capacity | Swing over Bed | 460 (18.11″) / 560 (22.05″) | |
| Swing over cross slide | 230 (9.06″) / 330 (13″) | ||
| Distance between centers | 1000(39.37″) | 1500 (59.06″) | |
| Width of Bed | 317 (12.48″) | ||
| Length of Bed | 1990(78.35″) | 2490 (98.03″) | |
| Headstock | Spindle bore, spindle speed | X-axis travel(cross-slide travel) | |
| Manual spindle ( gear type ): 70 (2.76) ,1800 rpm – variable speed | |||
| Chuck speed must match with spindle speed of 3000 rpm. | |||
| Spindle nose | A2-6 | ||
| Range of spindle speed | 1800 rpm / OP.3000rpm | ||
| Travel | X-axis travel(cross slide travel) | 230(9.06”) / 280 (11.03”) by standard manual 4-way tool post X-axis travel changed by different turret. | |
| Z-axis travel(longitudinal travel) | 1000 (39.37″) | 1500 (59.06″) | |
| Z-axis travel changed by different turret, chuck or Tailstock. | |||
| X-axis ball screw diameter | 25 mm , pitch 5 mm | ||
| Z-axis ball screw diameter | 50 mm , pitch 10 mm | ||
| Feed | X-axis rapid feed | 5000 mm/min (196.85″ /min) | |
| Z-axis rapid feed | 7500 mm/min (295.28″ /min) | ||
| X-axis cutting feed rate | 0-3000 mm/min (118.11″ /min) | ||
| Z-axis cutting feed rate | 0-5000 mm/min (196.85″ /min) | ||
| Turret | Tool station, tool shank | Manual 4-way 20×20 (0.79″x 0.79″) | |
| Tail stock | Quill diameter | 52 ( 2.05″ ) | |
| Quill travel | 130 ( 5.12″) | ||
| Taper of center | MT.4 | ||
| Motor | Spindle Motor | 7.5kw (10HP) | |
| X-Axis servo Motor | 1.2 kw (1.6HP) | ||
| Z-Axis servo Motor | 1.2 kw (1.6HP) | ||
| Coolant pump | 0.1 kw(1/8 HP) | ||
| Optional : Hydraulic pump Motor | Optional: 1.5 kw (2HP) | ||
| Measurement | N.W./G.W.(approx) -AL-460 (kgs) | 2900 / 3000 | 3300 / 3400 |
| N.W./G.W.(approx) -AL-560 (kgs) | 3200 / 3300 | 3600 / 3700 | |
| Shipping dimension-Semi-guard (LxWxH) (approx) | L: 3000, 3500 x W 2000x H2210 ( 118″, 138″ x 79″ x 87″ ) | ||
| Shipping dimension-Full-guard (LxWxH) (approx) | L: 3800, 4300 x W2000x H2210 ( 150″, 170″ x 79″ x 87″ ) | ||
| Standard Color | Upper Parts: RAL-7035 (light gray) + Base : RAL-5015 (blue) | ||
*Note :
(1) X and Z axes actual cutting travel will change when equipped with different chuck,turret, and tail stock.
(2) Specifications are subject to change without notice for improvement
